Automated interaction with big arrays of SIM cards

Do you need to activate or register a big number of SIM cards?
And is it unprofitable to manually process them?
 SIM Roulette is the best solution!

SIM Roulette SR-1640


SIM Roulette SR-1640 allows to work with an array of 4000 full-size SIM cards. The cards are situated in 16 SIM banks, the capacity of each is 250 cards. The number of SIM cards which work simultaneously is determined by the number of card receivers which are installed in the device as well as by the number of the modems which are connected to the device, and it can vary from 1 to 32.

Card receivers can be installed into 2 floors. The installation of a card-receiver in the lower floor reduces the capacity of the SIM bank by about 70 SIM cards and by 100 SIM cards in the upper floor. A card receiver contains a group of spring golden contact needles, which are put in motion by a separate brushless motor. The construction securely fixes the needles on the contact grounds of a SIM card leaving a small (visually unnoticeable) contact stain.

There is a 14-pin connector on the control board of each card receiver for the connection of the modem-module of SIM Roulette (the variants include 2G, 3G, CDMA, etc. See Modems) Through a special adapter SIM Roulette can connect to any device of mobile connection such as a mobile phone, a USB-modem, a GSM-gateway, a VoIP-gateway, etc.

SIM Roulette uses industrial net interface RS485 to control additional devices. As outer periphery the following devices can be used: SIM card comutator, headset switch, autoinformator, dialer, power switch etc. (See additional modules). Our web-site has a detailed description of the link protocol for the independent development of an plug in module compatible with SIM Roulette.

To reflect information SIM Roulette uses a built-in text monochrome two-line display. A remote control which comes with SIM Roulette can be used for manual control.

All the settings as well as testing and calibration SIM Roulette are performed through a WEB-interface.

The charge of SIM cards into SIM Roulette can be carried out manually either stacks through the outlets in the upper panel or one at a time through the slot in the front panel. The discharge of SIM cards can be done manually either stacks through the outlets in the upper panel or into external storage in the front panel.

An inner control unit such as a computer or a smartphone is necessary to organize the automatic work with the device.


SIM Roulette Nano 500


It allows to work with an array of 500 Nano SIM. SIM cards are placed on eight tracks around a disk. The device can instantaneously choose a random SIM card from the array and install it into a card-receiver to interact with a modem. The disk which contains the set of SIM cards is removable. It allows to operate ready sets of SIM cards.

Micro SD is used to store data about SIM cards.

A card receiver contains a group of spring golden contact needles, which are put in motion by a separate brushless motor. The construction securely fixes the needles on the contact grounds of a SIM card leaving a small (visually unnoticeable) contact stain.

There is a 14-pin connector on the control board of each card receiver for the connection of the modem-module of SIM Roulette (the variants include 2G, 3G, CDMA, etc. See Modems) Through a special adapter SIM Roulette can connect to any device of mobile connection such as a mobile phone, a USB-modem, a GSM-gateway, a VoIP-gateway, etc.

SIM Roulette uses industrial net interface RS485 to control additional devices. As outer periphery the following devices can be used: SIM card comutator, headset switch, autoinformator, dialer, power switch etc. (See additional modules). Our web-site has a detailed description of the link protocol for the independent development of an plug in module compatible with SIM Roulette.

To reflect information SIM Roulette uses a built-in graphic display. A remote control which comes with SIM Roulette can be used for manual control.

All the settings as well as testing and calibration SIM Roulette are performed through a WEB interface.

The device has a big memory capacity and a powerful processor which makes it self-sufficient and allows to find solutions to a wide range of tasks, for example to activate and register SIM cards, to send and receive text-messages, to receive USSD commands and phone-calls.

Contact our email info@sim-roulette.com in order to receive more detailed information or to purchase the device.

Новости SIM Roulette

Анонсы новых девайсов и софта, информацию об акциях и скидках мы публикуем только в соцсетях: